Description
Properties:
– For universal use – outstanding adhesive strength on a wide range of materials and surfaces
– Highly elastic
– Dampens vibrations and noise
– Long skin formation time
– Can be sanded and painted over
– Approved for use with food stuffs (ISEGA certificate)
– Non-corrosive
– Low-odour
– Free from silicones
Certificates/test reports:
ISEGA*: Clearance certificate no.: 46567 U18
Surface pre-treatment:
The application surfaces must be clean, dry and free of grease. The processing temperature is between
+5°C and +35°C
Application:
- Cut the nozzle tip to create the required bead geometry. The adhesive must be applied using a manual,
battery-powered or piston-rod-style compressed-air gun to ensure a reliable finish. Apply the adhesive
in the form of a triangle of beads to ensure an even layer thickness. A minimum adhesive layer thickness
of 3 mm is recommended to harness the benefits of thick-coat bonding. Once opened, ensure that all
containers are used up within a short period of time.